George Henry Draper
- Born: 7 May 1829, Attleboro MA
- Marriage (1): Emily P. Miller in 1853 in Attleboro MA
Events in his life were:
- He worked circa 1850-1880 as a jeweler in Attleboro MA
- He appeared on the 1860 census taken at Attleboro MA, listed as a jeweler.
- He was issued design patent number 75,393 on 10 Mar 1868
WILLIAM O. DRAPER, ALBERT C. SWEETLAND, AND GEORGE H. DRAPER, OF NORTH ATTLEBORO, MASSACHUSETTS.
Letters Patent No. 75,393, dated March 10, 1868.
MODE OF IMITATING CLUSTER-JEWELRY.
To All Whom It May Concern:
Be it known that we, WILLIAM O. DRAPER, ALBERT C. SWEETLAND, and GEORGE H. DRAPER, all of North Attleboro, in the county of Bristol, and State of Massachusetts, have invented a new and useful Improvement in the Method of Making Imitation Cluster-Jewelry; and we do hereby declare that the following specification, taken in connection with the drawings making a part of the same, is a full, clear, and exact description thereof.
Figure 1 represents a perforated plate, which, when combined with the stone, will form the apparent setting.
Figure 2 represents the form in which the colored glass imitating the stones is prepared.
Figure 3 exhibits a specimen of the finished article.
Heretofore "cluster-work," or that style of jewelry which, in the form of breast-pins, buttons, ear-rings, &c., consists of an aggregation of small stones arranged in a cluster, has, in the case of imitation jewelry, as in that which is genuine, been made by mounting each stone, or its glass imitation, in an appropriate plate, furnished with as many settings as there are stones, each stone being held in the grasp of its appropriate setting by the friction, of the edge of the latter against the surface of the stone.
In the manufacture of genuine work this method is the only one practicable, on account of the small size and high value of the jewels employed. In imitation-work, where colored glass, in place of precious stones, is employed, the method of constructing which is the subject of the patent can be employed, and the object of which is to produce an article which shall have at least the merit of excelling the ornament which it counterfeits in point of durability and strength.
Instead of making use of separate "stones," as the colored glass used for the purpose is called, we employ a glass disk of any desired hue, the top surface of which is furnished with bosses of the same material, arranged of any size and according to any pattern suitable for the intended article. A specimen of this bossed plate is shown at fig. 2, and the same, and others of any pattern, can be readily moulded by glass-workers. In place of the setting heretofore used, we employ a perforated cap, fig. 1, which may be of very thin sheet metal. It should have its edge turned over to form a rim, so as to admit of its being burnished against the edge of the glass plate, or to be soldered to the back-plate if a back-plate of metal is used. The perforations in the plate should correspond in form with the base outline of the bosses, and should be arranged in the same pattern. This perforated plate can readily be made by means of dies and formers of proper shape operated in a jeweller's press, as is well understood.
The article is completed by placing the plate over the glass disk, fig. 2, so that the bosses upon the latter will protrude through the perforations, and by burnishing the wire against the edge, or soldering it to the back plate, as before stated. The attachments necessary to make the article into a button, breast-pin, or other, article, can now be added, as in other cases.
Not only, by the method of making the article described, is it impossible for any one of the stones forming the cluster to become detached, but the cost of making it is very much less than the cost of making the same article in the old way.
What we claim as our invention, and desire to secure by Letters Patent, isó
The method of constructing cluster-work jewelry, substantially as herein described.
W. O. Draper
Albert O. Sweetland
G. H. Draper
George E. Fisher
H. W. Draper
- He appeared on the 1870 census taken at Attleboro MA, listed as a manufacturing jeweler.
- He appeared on the 1880 census taken at Attleboro MA, listed as a jeweler.
George married Emily P. Miller in 1853 in Attleboro MA. (Emily P. Miller was born about 1831.)